jewelry. Saturday , June 10th , 2017 - 05:09:50 AM
You may find many retail stores, locally, that will offer you all the required items. The perks of visiting the local stores are that you will see all the products with bare eyes and you will decide on the quality that you want, it will save your expenses on shipping charges and buying things in bulk will save some really good sum, for sure.
A good solution makes use once again of the rolling mill once filed the piece should be annealed and fed several times through the rolling mill, this is similar to using a rolling pin to flatten dough. Care must be taken each to time turn the piece at a 90 degree angle so as not to distort your design. Also when using this method the sheet will have been significantly thinned by the time the surface is perfect. For that reason it is recommended to use a much thicker sheet than the desired thickness of the finished product. 1.5 mm or thicker work well.
2. Cut the piece approximately 5/8 longer than needed, that extra length will make the loop that your leather rope will go through to hang the pendant when finished. Now grind that extra length to an even thickness, approximately 1/16 thick, so it will bend easily to form the loop. If it is too wide you can grind some off of the width before you bend the loop. With a fine file, smooth the edges of the ground metal so that it will not mar the leather and will slide easily on the cord.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Jewelleryplus claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.